Skip to main content
Roosevelt University in Chicago, Schaumburg and Online - Logo

COE Video Creation

Overview

You do not have to use the microphone.  It depends on your classroom situation and noise level. Microphones are suggested when recording a small group in the classroom where the rest of the class is present. If you do use the microphone, you must do the set-up and test immediately before filming. Do not turn off the iPad or the microphone before filming or you will need to do the set-up procedure again.

Practice often with the microphone before it really counts. If the microphone is not properly functioning, you will have no sound for the video. This cannot be reversed.

Instructions

  • Connect Receiver Jack to Receiver

    Picture of receiver jack connected to microphone

     
  • Wrap Strap around top of tripod

    Picture of strap connected to top of tripod
     
  • Connect Receiver Jack to the microphone adapter (the pink one) of the Microphone Splitter on one end and the phone/iPad on the other (NOTE: Make sure you have the jack with 3 rings connecting into the phone/iPad)

    Picture of receiver jack connected to microphone splitter

     
  • Pair the Bluetooth Receiver and Microphone by turning them on and holding them near each other until the blue lights stay on solid blue

    Picture of microphone and receiver jack blue lights
     
  • Hang Receiver on Strap that is attached to the tripod

    Picture of receiver jack hanging on strap
     
  • Hang Microphone onto instructor (make sure it is in close proximity to the mouth)

    Picture of where to best place microphone on instructor

Librarian Contact Information

Photo of librarian Barbara Anderson

Barbara Anderson, Ed.D.
Head of Instruction and Learning

Office: 1030 AUD
Phone: 312-341-3647

Email Me